K. kmoses Discussion starter · Feb 10, 2012. I sprayed the entire car with Nason Select-Prime 421-19 2K urethane primer and block sanded to P400 dry. I then sprayed the two front fenders, the hood and the trunk lid with Nason Ful-Poxy 491-16 Epoxy primer blocked sanded dry to P400 and wet sanded to P500 ( I am planning to spray the whole car ...A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions Application Ful-Base® Basecoat IF Quality Color 8 Ful-Base® 483-30™ Basecoat Activator ½ Ful-Base® 441-2X™ Reducers 4 *Do not use 441-29 POT LIFE 4 hours at 70°F (21°C) SPRAY VISCOSITY 20-21 seconds in a Zahn #2 APPLICATION SURFACE PREPARATION Before sanding, remove all traces of oil, wax and grease with Nason® 441-05™ Silicone andUS :ENGLISH Ful-Thane 2K 2K Urethane Activator 483-15 Section 4. First aid measures Wash out mouth with water. Remove dentures if any. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomitingVolume: 16 Ounce. Fast and easy to apply, Nason (R) Finishes take you from start to beautiful finish with speed and efficiency at a low cost. The system was designed to work together to give you the best results when time and money are limited. Nason (R) undercoats, topcoats and clears deliver Value in a Hurry (TM).Additive: FEE: 2-4 oz 495-01™ per RTS gal. Accelerator: 2-4 oz 483-18™ per RTS gal. Viscosity: 20-21 seconds in a Zahn #2 cup: Pot Life: 4 hours at 70°FThe perfect mix of paint, catalyst, and reducer has been achieved. In a mixing bowl, mix two parts NasonXL Basecoat Color and one part NasonXL Reducer. The viscosity of the spray will be 16 seconds, and the temperature of the spray will be 77 degrees F / 25 degrees C. 2 to 3 coats of primer are applied with a flash period of 4 to 8 minutes.Do not use under any urethane paints other than Nason® Ful-Thane® 2K Urethane. Use same reducer for Bond-Seal™ as recommended for the Nason® single-stage topcoat to be applied. DRY TIMES To topcoat (for Nasco™ and Ful-Base® Topcoats): 10 minutes, but within 8 hours PHYSICAL PROPERTIES All Values Ready To Spray Max.how do you mix nason base coat properly? it state to mix 8:1/2:4, none of the mixing cups i've got have an 1/2 mark on it. the only way i can think to mix it properly is to double the amount of color and reducer in oz's to get a whole oz in activator, which ends up being way to much paint for one coat.Additive: FEE: 2-4 oz 495-01™ per RTS gal. Accelerator: 2-4 oz 483-18™ per RTS gal. Viscosity: 20-21 seconds in a Zahn #2 cup: Pot Life: 4 hours at 70°FReference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers.Item#: NAS 400-53 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. Approved customers please Log In or Register for approval.MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Ful-Thane® 2K Urethane Binder (IB Quality) Ful-Thane® 483-15TM 2K Urethane Activator Ful-Base® 441-20TM / 441-21TM / 441-22TM Reducer Volume 8 ADDITIVES Fisheye EliminatorAxalta Nason Fulthane 2K Urethane Quart Mix. Item#: NAS IB -4. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles.Show's how to do a complete automotive paint job using inexpensive materials such as old school lacquer primer from Auto Body Master and Nason Ful-Cryl II Ac...A 2K urethane, non-sanding, gray sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. It can be applied directly over a variety of substrates, including sanded OEM replacement panels. Features. Grey in color; Good application properties; Fast nib sanding; Product DetailsJust got done spraying red Nason 2k Ful-thane single stage for the first time. I have some orange peel here and there along with some dirt in the hood. I have color sanded Centari and Delstar, but I am not sure how to tackle this with this newfangled urethane. I intend to hand wet sand with 1200 then buff.MIXING COMPONENTS Mix 2 parts NasonXL Basecoat Color to 1 part NasonXL Reducer. Thin to spray viscosity of 16 secs with #4 Ford @ 77°F/25°C for spraying. Option for longer re-coating: Add 5% hardener to premixed basecoat Component Volume NasonXL Basecoat Color 2 NasonXL Reducers 1 (447-65 Fast, 447-75 Medium, 447-85 Slow) Package SizesI sprayed over sanded 2K primer. Before I sprayed I wiped the panel with 70% rubbing alcohol. The fisheyes/solvent pop didn't show up until an hour or two after the last coat. I sanded down the panel with 220 and some of the craters are fairly deep but non of them go to the primer. Could it be oil in the air section of the gun?Reference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers.Oct 23, 2013 · 8-1-2 ratio is for Nason Ful-Thane single stage . Check the label on the can of color for the correct ratio and hardener numbers . If the lower door is your only problem why not just respray the door to the side mldg just above the handle . Axalta Nason Fulthane 2K Urethane Gallon Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix ...apply nason base coat paint hunker, new nason automotive paint color chart cafe racers, here is the dupont nason full cryl ii, nason ful thane 2k urethane single stage automotive paint, nason single stage paint color chart brain mapping org, nason paint mixing instructions wordpress com, nason paint colors new car release date and review 2018 ...Parts by Volume. 491-10™. 2. 483-01™ / 483-02™. 1. Viscosity. 20-22 seconds in a Zahn #2 cup. Pot Life. 12 hours at 70°F.MIX RATIO . Combine the components by volume (4:1:1). Mix thoroughly prior to activation. Component Volume . Ful-Thane 2K Urethane Single Stage Color (NIB Quality) 4 . Axalta VS5300 Urethane Activator 1 . Axalta VS5160 / VS5170 / VS5180 / VS5190 Reducer 1 435-00, 435-01 Ful-Thane Binders VS5300 Urethane Activator VS5160, VS5170, VS5180, VS5190 ...The perfect mix of paint, catalyst, and reducer has been achieved. In a mixing bowl, mix two parts NasonXL Basecoat Color and one part NasonXL Reducer. The viscosity of the spray will be 16 seconds, and the temperature of the spray will be 77 degrees F / 25 degrees C. 2 to 3 coats of primer are applied with a flash period of 4 to 8 minutes.Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.Axalta Nason 2K Integrated Clear 401-20. Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. Your Price: 0.99. Nason Single Stage Gloss Question How to Paint Your Own Dupont / Nason Urethane Full Thane 2K Urethane SingleTitle: Dupont Nason Paint Color Chart Pdf _ (Download Only) Created Date: 5/31/2023 7:53:26 AM8-1-2 ratio is for Nason Ful-Thane single stage . Check the label on the can of color for the correct ratio and hardener numbers . If the lower door is your only problem why not just respray the door to the side mldg just above the handle .Just got done spraying red Nason 2k Ful-thane single stage for the first time. I have some orange peel here and there along with some dirt in the hood. I have color sanded Centari and Delstar, but I am not sure how to tackle this with this newfangled urethane. I intend to hand wet sand with 1200 then buff.Nason 496-00 SelectClear 2K Urethane Spot Clear. Vendor: Mahopac Auto Paint. $146.99. $123.00. Nason 483-70 Selectclear 2K Activator-Mid-Temp (2.5L) Vendor: Mahopac Auto Paint. $171.99. $140.00. Nason 475-00 SelectClear 2K Urethane High Image Clear.MIXING COMPONENTS Mix 2 parts NasonXL Basecoat Color to 1 part NasonXL Reducer. Thin to spray viscosity of 16 secs with #4 Ford @ 77°F/25°C for spraying. Option for longer re-coating: Add 5% hardener to premixed basecoat Component Volume NasonXL Basecoat Color 2 NasonXL Reducers 1 (447-65 Fast, 447-75 Medium, 447-85 Slow) Package SizesFul-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Catalyst Ful-Base® 441-20™ Reducer Fast Ful-Base® 441-21™ Reducer Medium Ful-Base® 441-22™ Reducer Slow Ful-Base® 441-29™ Reducer Super Flow MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Item#: NAS 400-53 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. Approved customers please Log In or Register for approval.Axalta Nason Fulthane 2K Urethane Quart Mix. Item#: NAS IB -4. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles.Single Stage Topcoat ; Thinner ; ... FUL-THANE URETHANE SS BINDER "IS" 2.8 Gallon. ... SELECTSEAL 2K URETHANE SEALER - BLACK Gallon. Item #: 422-52 01.Ful-Base® Basecoat IF Quality Color 8 Ful-Base® 483-30™ Basecoat Activator ½ Ful-Base® 441-2X™ Reducers 4 *Do not use 441-29 POT LIFE 4 hours at 70°F (21°C) SPRAY VISCOSITY 20-21 seconds in a Zahn #2 APPLICATION SURFACE PREPARATION Before sanding, remove all traces of oil, wax and grease with Nason® 441-05™ Silicone andAxalta Nason Fulthane 2K Urethane Quart Mix. Item#: NAS IB -4. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles.CODE DESCRIPTION REMARKS MIX RATIO HARDENER REDUCER MAX APPLIED VOC (LE) IB Quality Ful-Thane® 2K Single Stage Topcoat 8:1:2 483-15™ 441-2X 5.0 lb/gal IC Quality Ful-Base® Single Stage Topcoat 8:1:2 483-08™ 441-2X 5.0 lb/gal ID Quality Ful-Cryl® II Single Stage Topcoat 8:1:2 483-11™ 441-2X 5.0 lb/galApplication. Solid Colors: Add 1 part of RTS Ful-Thane 2K Urethane Single Stage (NIB) or Ful-Cryl 2K Acrylic Single Stage (NID) color to 1 part RTS VS4500 2K Urethane Integrated Clear during the last and final coat of the single-stage color. Effect Colors:Application. Solid Colors: Add 1 part of RTS Ful-Thane 2K Urethane Single Stage (NIB) or Ful-Cryl 2K Acrylic Single Stage (NID) color to 1 part RTS VS4500 2K Urethane Integrated Clear during the last and final coat of the single-stage color. Effect Colors:Application. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic.To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryJFG Discussion starter · Feb 25, 2009. Hi! I'm planning to paint my daily car as a practice before going on more serious project. I'm planning to use the Nason Ful-thane 2k urethane (solid black) with maybe a clearcoat Nason 497 (depending on your comments). The car (a small Nissan Sentra 1996 ) is already black so it's gonna be black on black.I just got myself all confused and need some clarification. :embarrass Nason Ful-Thane 2K Urethane is a single stage finish but it says 2K in the title, is it just a single stage? Do I have to shoot a clear over it if I’m using a metallic color? The last question is if I use a siphon gun, what tip size and psi works well with it.Ful-Base® Basecoat IF Quality Color 8 Ful-Base® 483-30™ Basecoat Activator ½ Ful-Base® 441-2X™ Reducers 4 *Do not use 441-29 POT LIFE 4 hours at 70°F (21°C) SPRAY VISCOSITY 20-21 seconds in a Zahn #2 APPLICATION SURFACE PREPARATION Before sanding, remove all traces of oil, wax and grease with Nason® 441-05™ Silicone andDetailed Description. Activator; Ful-Base 483-56 Low VOC Activator is used to mix Nason Ful-Thane 2K Urethane Topcoat (IS Quality), a 2.8 lbs/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.Axalta Nason 2K Urethane Sealer 422-50 Gallon. Item#: NAS 422-50 01. Nason 422-50 is a 2K urethane, non-sanding sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. Approved customers please Log In or Register for approval. Axalta Nason 2K Urethane Sealer Quart White.Part 401-20-4. 1 qt Paint. Designed to enhance the depth and color of Ful-Thane factory packaged colors, Ful-Thane 2K Urethane single-stage colors and Ful-Cryl II mix colors. Specifications.Parts by Volume. IF Quality. 8. 483-00™. 1/2. 441-2X. 4. Viscosity. 20-21 seconds in a Zahn #2 cup.Re: Is Nason Ful-thane 2K urethane paint good paint? It's getting harder and harder to find good single stage paints any more that can be mixed in the old colors, let alone those that are half-way affordable, since the refinish business has totally gone base/clear.Mixing Tips/Nozzles ... Activator for Nason Ful-Thane 2K Urethane Single Stage Paint. Vendor: Mahopac Auto Paint ...Axalta Nason Ful-Base Reducer 441-21 Medium Quart. Item#: NAS 441-21 -4. Reducer for Nason topcoats and urethane primers. 65-85 Degrees.Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors.Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. Gallon. Approved customers please Log In or Register for approval.US :ENGLISH Ful-Thane 2K 2K Urethane Activator 483-15 Section 4. First aid measures Wash out mouth with water. Remove dentures if any. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomitingAxalta Nason FulCryl II Acrylic Enamel Gallon Mix Item#: NAS ID 01. An acrylic enamel single-stage topcoat that provides very good gloss, chip resistance and durability for excellent performance characteristics. Please contact store for the proper price suffix for your color. Stock or paint code text may be added in the cart.CODE DESCRIPTION REMARKS MIX RATIO HARDENER REDUCER MAX APPLIED VOC (LE) IB Quality Ful-Thane® 2K Single Stage Topcoat 8:1:2 483-15™ 441-2X 5.0 lb/gal IC Quality Ful-Base® Single Stage Topcoat 8:1:2 483-08™ 441-2X 5.0 lb/gal ID Quality Ful-Cryl® II Single Stage Topcoat 8:1:2 483-11™ 441-2X 5.0 lb/galFul-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...Year old Nason Ful-Thane cut and buff. I have a car that was sprayed last September with Nason Ful-Thane single stage urethane (solid color). It has been stored inside since being painted. The paint job came out glassy smooth but I have some dirt and dust nibs in the paint. My question is what grit should I sand it with to remove the nibs.435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larry435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryA National Rule compliant, urethane single stage topcoat that is easy to apply and provides outstanding durability for a variety of applications. Ful-Thane 2K Urethane is Nason Finishes premium single stage paint designed for long-term gloss, durability, UV protection and overall performance. Ful-Thane 2K Urethane is our best single stage offering.Item#: NAS 400-53 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. Approved customers please Log In or Register for approval.Ful-Base® Basecoat IF Quality Color 8 Ful-Base® 483-30™ Basecoat Activator ½ Ful-Base® 441-2X™ Reducers 4 *Do not use 441-29 POT LIFE 4 hours at 70°F (21°C) SPRAY VISCOSITY 20-21 seconds in a Zahn #2 APPLICATION SURFACE PREPARATION Before sanding, remove all traces of oil, wax and grease with Nason® 441-05™ Silicone andFul-Thane 2K Low VOC Urethane Single Stage (NIS Quality) may be mixed with VS6200 Matte Base Additive to achieve various levels of desired gloss. For accurate mixing, refer to the matte mix formula in ColorNet® or Color Choice®. ADDITIVES . Fisheye Eliminator . Add 1 - 2 oz (30 ml – 60 ml or 30 – 60 grams) Axalta VS6500 Fisheye Eliminator ...Axalta Nason Fulthane 2K Urethane Pint Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix for ...A National Rule compliant, urethane single stage topcoat that is easy to apply and provides outstanding durability for a variety of applications. Ful-Thane 2K Urethane is Nason Finishes premium single stage paint designed for long-term gloss, durability, UV protection and overall performance. Ful-Thane 2K Urethane is our best single stage offering.Item#: NAS 400-50 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. GM Code 12 White 400-50 Gallon.one thing to keep in mind is the finish may dull out in a month after the initial cut/buff. nason is pretty easy to wet sand and buff after a month from what i have experienced with it. i noticed that if i do the wet sanding/buffing right after painting, it dulls out in about a month due to the paint curing and shrinking a little. so i prefer to have a vehicle back in a month or so and do it ...Just got done spraying red Nason 2k Ful-thane single stage for the first time. I have some orange peel here and there along with some dirt in the hood. I have color sanded Centari and Delstar, but I am not sure how to tackle this with this newfangled urethane. I intend to hand wet sand with 1200 then buff.Just got done spraying red Nason 2k Ful-thane single stage for the first time. I have some orange peel here and there along with some dirt in the hood. I have color sanded Centari and Delstar, but I am not sure how to tackle this with this newfangled urethane. I intend to hand wet sand with 1200 then buff.Scjarena Discussion starter · Jan 8, 2018. I never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some ...435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryNason 496-00 SelectClear 2K Urethane Spot Clear. Vendor: Mahopac Auto Paint. $146.99. $123.00. Nason 483-70 Selectclear 2K Activator-Mid-Temp (2.5L) Vendor: Mahopac Auto Paint. $171.99. $140.00. Nason 475-00 SelectClear 2K Urethane High Image Clear.apply nason base coat paint hunker, new nason automotive paint color chart cafe racers, here is the dupont nason full cryl ii, nason ful thane 2k urethane single stage automotive paint, nason single stage paint color chart brain mapping org, nason paint mixing instructions wordpress com, nason paint colors new car release date and review 2018 ...Nason Full-Thane lists the ratio as 8:1:2 My mix cups have 8:1:1 Using the '5' scale the distance between the 1:1 is 3/8". Will adding 3/8" mark to the last column give me an 8:1:2 ratio? View attachment 1715764917Item#: NAS 400-50 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. GM Code 12 White 400-50 Gallon.Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.
Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp). Denim overshirt women
SelectPrime™ 483-87™ 2K Activator (Mid-Temp) SelectPrime™ 483-88™ 2K Activator (Hi-Temp) MIX RATIO Combine the components by volume (4:1). Mix thoroughly prior to activation. Component Volume SelectPrime™ 421-17™ / 421-19™ 2K Urethane Primer 4 SelectPrime™ 483-88™ / 483-87™ 2K Activator 1 TINTABILITY Not recommended POT LIFEScjarena Discussion starter · Jan 8, 2018. I never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some ...Detailed Description. Activator; Ful-Base 483-56 Low VOC Activator is used to mix Nason Ful-Thane 2K Urethane Topcoat (IS Quality), a 2.8 lbs/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryDuPont Top Coat Nason® Ful-Thane® 2K IB Quality Single-Stage Topcoat FUL-THANE® 2K URETHANE Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Download tech data.Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...Nason Full-Thane lists the ratio as 8:1:2 My mix cups have 8:1:1 Using the '5' scale the distance between the 1:1 is 3/8". Will adding 3/8" mark to the last column give me an 8:1:2 ratio? View attachment 1715764917we were going to use the Nason ful-thane , but our supplier suggested the Imron. I was amazed at how well it sprayed. You can plow that stuff on & it will not run. Im seriously thinking about using it when I do my truck. you can even get it in Flat, Semigloss, or regular gloss. RM's Uno is good also, I like the way it lays down, & it seems to last.Nason Ful-Thane IS Quality Single-Stage Topcoat. A urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Click here to visit the product catalog.A National Rule compliant, urethane single stage topcoat that is easy to apply and provides outstanding durability for a variety of applications. Ful-Thane 2K Urethane is Nason Finishes premium single stage paint designed for long-term gloss, durability, UV protection and overall performance. Ful-Thane 2K Urethane is our best single stage offering.MIX RATIO . Combine the components by volume (4:1:1). Mix thoroughly prior to activation. Component Volume . Ful-Thane 2K Urethane Single Stage Color (NIB Quality) 4 . Axalta VS5300 Urethane Activator 1 . Axalta VS5160 / VS5170 / VS5180 / VS5190 Reducer 1 435-00, 435-01 Ful-Thane Binders VS5300 Urethane Activator VS5160, VS5170, VS5180, VS5190 ...JFG Discussion starter · Feb 25, 2009. Hi! I'm planning to paint my daily car as a practice before going on more serious project. I'm planning to use the Nason Ful-thane 2k urethane (solid black) with maybe a clearcoat Nason 497 (depending on your comments). The car (a small Nissan Sentra 1996 ) is already black so it's gonna be black on black.Oct 23, 2013 · 8-1-2 ratio is for Nason Ful-Thane single stage . Check the label on the can of color for the correct ratio and hardener numbers . If the lower door is your only problem why not just respray the door to the side mldg just above the handle . pre-formulated flat/mat clears are SOOOOOOOOO much easier on bigger jobs and all overs. all you do is mix and go. you can adjust the flatness by how many coats and reducer, again so much easier than a flattening ratio with an additive. i've done a few with sikkens mat clear with no problems, now give me a 2 component system where i have to mix some single stage and flattener in it and i cant ...Parts by Volume. 491-16™. 1. 483-19™. 1. Viscosity. 16-22 seconds in a Zahn #2 cup. Pot Life. 24 hours at 70°F.Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Ful-Thane® 2K urethane is also available in Ful-Thane® 400-XX High Volume Factory Packages..